2 New SM300 based on NTTD

Discussion of Omega watches.
Post Reply
User avatar
rockmastermike
Feedback Virtuoso
Posts: 21666
Joined: Tue May 18, 2010 5:13 pm
Name: WDE

2 New SM300 based on NTTD

Post by rockmastermike » Thu Nov 21, 2024 5:05 am

Nicked from Time and Tide IG....

Image

Image

Image

User avatar
alund
Posts: 993
Joined: Mon Jun 27, 2011 4:41 am
Name: Alan

Re: 2 New SM300 based on NTTD

Post by alund » Thu Nov 21, 2024 5:14 am

I do like the black version. Also a plus a no date version. Not sure I like the price for the bracelet version, but I sure it will sell very well.

User avatar
tmw
Posts: 3982
Joined: Wed Dec 02, 2009 12:10 pm
Name: The Enabler
Location: Philly

Re: 2 New SM300 based on NTTD

Post by tmw » Thu Nov 21, 2024 5:45 am

It's about time. These are going to sell like hotcakes. The NTTD seamster is one of the best. will be interesting to see the differences assuming its a ss case vs ti.

My problem with the modern seamsters - and also the POs - are that the cases are too bulky.
Stan, don’t you know the first law of physics? Anything that’s fun costs at least eight dollars”
-- Eric Cartman

I bought a cheap watch from a crazy man
Floating down canal
It doesn't use numbers or moving hands
It always just says now
Now you may be thinking that I was had
But this watch is never wrong
And If I have trouble the warranty said
Breathe In, Breathe Out, Move On
- Jimmy Buffett

User avatar
raf42
Fister
Posts: 4798
Joined: Mon Nov 07, 2016 4:02 pm
Name: Rob
Location: California

Re: 2 New SM300 based on NTTD

Post by raf42 » Thu Nov 21, 2024 5:55 am

Beautiful, but having owned current model, skeleton hands are a no go for me. Put in sword hands and it would be a no brainer.

User avatar
425ranger
OMGWTFBBQ
Posts: 4427
Joined: Tue Dec 01, 2009 11:54 am
Name: Bill

Re: 2 New SM300 based on NTTD

Post by 425ranger » Thu Nov 21, 2024 6:21 am

raf42 wrote:
Thu Nov 21, 2024 5:55 am
Beautiful, but having owned current model, skeleton hands are a no go for me. Put in sword hands and it would be a no brainer.
Exactly. The 60th Anni version is my favorite.
Retired
Key West, FL
Have a sparkling day.

User avatar
DocHollidayDDS
Posts: 1066
Joined: Wed Nov 08, 2023 9:03 pm
Name: James
Location: SC

Re: 2 New SM300 based on NTTD

Post by DocHollidayDDS » Thu Nov 21, 2024 11:42 am

raf42 wrote:
Thu Nov 21, 2024 5:55 am
Beautiful, but having owned current model, skeleton hands are a no go for me. Put in sword hands and it would be a no brainer.
Yeah, give that brushed silver dial sword hands and the black bezel (and a proper link bracelet) and it would be hard to resist.

User avatar
hoppyjr
HJ
Posts: 40992
Joined: Thu Feb 24, 2011 9:05 am
Name: Hoppy

Re: 2 New SM300 based on NTTD

Post by hoppyjr » Thu Nov 21, 2024 11:52 am

I’ve had that new Omega mesh strap and love it. The black dial would be a must have (even with the ugly HEV) if not for the sword hands.

pete26
Posts: 103
Joined: Sat Jul 23, 2011 9:29 pm
Name: Peter Lind

Re: 2 New SM300 based on NTTD

Post by pete26 » Sun Nov 24, 2024 8:54 pm

Well seeing as the franchise is probably dead, they may as well milk it for what it's worth. I quite like them but prefer the Heritage 300 models more. I know at the end of NTTD they said James Bond will return, but I believe that this is misinformation to keep the franchise returns running for as long as they can. Eon Productions, AKA Barbara Broccoli and Michael G Wilson sold the distribution rights for all the Bond films to Amazon soon after completing NTTD. I think this is a prelude to their retiring the series, at least as a movie franchise. Broccoli wants to focus on "other' Projects and Wilson is 82 so probably wants to retire with his millions.

If you notice there have been quite a few indications that the franchise is finished: 1) They killed Bond off 2) There has been no announcements of either a new film, or a new actor, to play Bond, even though rumours have been circulating since 2019 3) Daniel Craig was asked recently who he would like to see play Bond and he said he didn't care. 4) The Bond movies have been available to buy on Prime, other than Bond week when they were free for viewing with a subscription. Last week, I was seeing notifications that the Bond films were not going to be available to view with a subscription after the last Bond day, however, this has changed in the last few days and the movies are still available, although this could be because you can watch them with a Stan subscription.

Unfortunately the Bond producers have always been known to fly loose with the facts, They said Danny Boyle was replaced as Director of NTTD because he wanted to kill Bond off. In reality the opposite was true, he denied that and said that he told them it was stupid to kill a character like Bond as that would spell the end of the franchise. He said it was an unspoken rule that Bond doesn't die, even though Fleming himself wanted to kill the character off at the end of "From Russia with Love", but changed his mind when his publishers made a lot of noise.

I think that the disclaimer at the end of NTTD was fulfilled by the Prime tv show 007, the road to riches, several novelisations without 007 as a lead character but mentioned as well as licensed comics produced by Dynamite. So IMHO, we will not see another Bond film. Amazon may produce a limited series like Reacher based on Fleming's original novels, but to keep the tone they would need to set them in the Cold War, which is doubtful anyway given the current climate in Hollywood. Some even speculated that the only way to keep the series relevant would be to replace 007 with a female, which they did in NTTD, but after that plans must have fizzled away.

I think another reason that there have been no announcements is that Daniel Craig is still an Omega Ambassador and is an unofficial (or maybe official) board member of Omega.

Another bit of trivia I found out the other day was that when Omega issues a new Bond watch at least one from a series is offered to the other actors who played Bond. I'm not sure if it's all of them, but both Roger Moore and Pierce Brosnan had LE Bond editions. Sir Roger's tenure ended long before Omega became the watch of choice for Bond. His Omega was a 2012 edition and was auctioned last year at Sotheby's.

User avatar
425ranger
OMGWTFBBQ
Posts: 4427
Joined: Tue Dec 01, 2009 11:54 am
Name: Bill

Re: 2 New SM300 based on NTTD

Post by 425ranger » Mon Nov 25, 2024 8:54 am

Don't forget the new bronzegold model...
Screenshot_20241125_115351_YouTube.jpg
You do not have the required permissions to view the files attached to this post.
Retired
Key West, FL
Have a sparkling day.

User avatar
hoppyjr
HJ
Posts: 40992
Joined: Thu Feb 24, 2011 9:05 am
Name: Hoppy

Re: 2 New SM300 based on NTTD

Post by hoppyjr » Mon Nov 25, 2024 10:05 am

I don’t understand Omega these days….

The 2254 was a simple dial & hand swap to the existing “Bond style” SMP. It would be simple to do the same with the current SMP, just a dial & handset! They wouldn’t need to do any retooling and it would be a huge seller. I don’t think it would impact current SMP sales much, as the prior models coexisted well.

It makes no sense.

User avatar
Chocodove
Posts: 9320
Joined: Mon Jun 17, 2013 1:35 pm
Name: Todd
Location: NJ

2 New SM300 based on NTTD

Post by Chocodove » Thu Feb 13, 2025 2:47 pm

The slight differences on this one over the standard models sold it for me.

No date
Matte aluminum bezel
Domed crystal
Deployant clasp
Matte dial with OG small waves
Slightly reduced lug to lug
AR coating on inside only

Shout out to Ralph for the flawless hookup from ETP.

Image
- Todd

User avatar
hoppyjr
HJ
Posts: 40992
Joined: Thu Feb 24, 2011 9:05 am
Name: Hoppy

Re: 2 New SM300 based on NTTD

Post by hoppyjr » Thu Feb 13, 2025 4:29 pm

Chocodove wrote:The slight differences on this one over the standard models sold it for me.

No date
Matte aluminum bezel
Domed crystal
Deployant clasp
Matte dial with OG small waves
Slightly reduced lug to lug
AR coating on inside only

Shout out to Ralph for the flawless hookup from ETP.

Image
It’s pretty terrific IMO. A solid 9/10

+ Would be 9.75 without HEV

+ Would be 10/10 with sword hands

User avatar
HiDive
Posts: 22
Joined: Sun Jun 30, 2019 5:15 pm
Name: Vincent
Location: Pittsburgh, PA 15317

Re: 2 New SM300 based on NTTD

Post by HiDive » Sat Feb 15, 2025 12:56 pm

Yeah, if they put sword hands on it and made it out of Ti with a bracelet I would be on it.
Rule number nine - Always carry a knife.

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests